– Connect the hand vacuum pump - VAS 6213- to the pressure
box -arrow-.
Caution
Risk of damage to the pressure box from excessive vacuum.
♦ Under no circumstances, must a vacuum greater than
-800 mbar be generated.
Adjust the voltage value
– Using the hand vacuum pump - VAS 6213- continue pumping
until the pressure gauge indicates a vacuum between
-650...-700 mbar.
Version 1
– Slide the pressure box in the -direction of arrow- until a voltage
of 0.75 ± 0.02 V appears on the ⇒ Vehicle diagnostic tester.
– Tighten screws -1- to 10 Nm.
Version 2
– Slide the pressure box in the -direction of arrow- until a voltage
of 0.75 ± 0.02 V appears on the ⇒ Vehicle diagnostic tester.
– Tighten screws -1- to 10 Nm.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
1. Charge-air system - exhaust gas turbocharger
305