Summary Of Components - Air Filter - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Unscrew screws -10...1- with the Polydrive socket XZN 10 -
T10501- , remove the intake manifold with charge air cooler.
Install
– Place the new cylinder head gasket onto the fitted pins.
Caution
Do not damage the sealing surface of the intake manifold when
placing it onto the fitted pins.
– Tighten screws -1...10- as per the tightening torques and -
sequence
⇒ Fig. ""Intake manifold with charge air cooler - tightening tor‐
que and tightening order"" , page 357
Continued installation is carried out in the reverse order. When
installing, note the following:
Note
Replace gasket.
– Install air filter
⇒ "6.5 Removing and installing air filter", page 364
– Installing high pressure line
⇒ "2.9.2 Installing high pressure line", page 335
– Install the front top coolant pipe
⇒ "3.2 Removing and installing the front top coolant pipes",
page 172 .
Tightening torques
♦ ⇒ "1.6 Hose connections with screw clamps", page 308
♦ ⇒ "6.1 Assembly overview - intake manifold", page 355
♦ ⇒ "1.1 Parts of the lubrication system - Summary of compo‐
nents", page 127
6.4

Summary of components - air filter

362
Rep. gr.23 - Mixture preparation - injection
.
.
.