Skoda Octavia III 2013 Workshop Manual page 255

– Unlock electrical plug connections -2- from left closing flange,
and remove.
– Unlock electrical plug connections -1- and -3- from closing
flange, and disconnect.
– Unclip electrical plug connections -1- and -3- from the uptakes
on the closing flange.
Note
Ensure that the fuel delivery unit is not damaged when loosening
and tightening the lock ring of the holder on the flange.
– Open lock ring with the wrench - T30101 (3087)- .
– Carefully raise closing flange -2- and remove it from the fuel
tank opening.
Note
Remove gasket ring -3- from fuel tank opening.
– Remove the suction jet pump -1- from the fuel gauge sender
2 - G169- . To do so, carefully bend the retaining lugs
-arrows- outwards.
Caution
Place a cleaning cloth underneath in order to collect the fuel.
– Remove the fuel gauge sender 2 - G169- carefully out of the
fuel tank opening. Turn and tilt accordingly to do so.
Note
Make sure that the float arm of the fuel gauge sender 2 - G169-
is not bent.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
2. Removing and installing parts of the fuel supply system
247