Skoda Octavia III 2013 Workshop Manual page 238

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Disconnect fuel line -1- at the closing flange
⇒ "2.12 Separating push-on couplings", page 249
– Disconnect fuel return-flow line -2- at the closing flange
⇒ "2.12 Separating push-on couplings", page 249
Vehicles fitted with auxiliary heating
– Remove fuel line -3- to the dosing pump - V54- for the auxiliary
heating at the closing flange.
– To do so, open the bottom clamp.
– Carefully pull out fuel line -3-.
Continued for all vehicles
Note
Ensure that the fuel delivery unit is not damaged when loosening
the lock ring of the holder on the flange.
– Open locking ring using union nut wrench - T30101 (3087)- .
– Carefully lift out fuel delivery unit flange -3-.
– Remove gasket -1- and raise the fuel delivery unit flange
slightly higher.
Caution
Secure the earth cable of the fuel extraction device to a bare
metal part of the body.
– Insert suction hose of fuel extractor - VAS 5190- as far as
possible into fuel tank.
– Extract fuel using the fuel extraction device - VAS 5190- .
230
Rep. gr.20 - Fuel supply system
.