Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Raise holding clamps -1- and undo hose clamp -3-, remove
coolant hoses.
– Release nuts -arrows-, remove coolant pipe.
Continued for all vehicles
– Unscrew screw -2-, loosen screws -1-, -3-, -4- only.
For vehicles with engine identification characters CRKB, CRMB,
CUNA
– Separate electrical plug connections -1-, -3-.
– Loosen hose clamp -2-.
Continued for all vehicles
– Disconnect and expose electrical plug connections:
1 - for charge air temperature transmitter after charge air cooler -
G811-
3 - for charge pressure sender - G31-
4 - for intake air temperature transmitter - G42-
5 - for throttle valve control unit - J338-
– Unscrew hose clamps -2-, -7-, remove coolant hose -6-.
97
1. Removing and installing cylinder head