Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Loosen screws for camshaft housing in the sequence
-18 ... 1-.
– Unscrew the screws and carefully loosen the camshaft hous‐
ing and remove from the bonding.
Install
Requirements:
•
Interlock crankshaft with crankshaft arrester - T10490- .
•
Lock the hub of the camshaft with the rig pin for diesel injection
pump - 3359- .
•
Screw loosely inserted.
Caution
Risk of contamination of the lubrication system and bearing.
Cover opened engine parts.
WARNING
Wear protective gloves when working with sealant and grease
remover!
– Remove residual sealant on the bearing frame and cylinder
head using a chemical sealant remover.
– Clean sealing surfaces, they must be free of oil and grease.
116
Rep. gr.15 - Cylinder head, valve gear