– Lock the inlet camshaft with rig pin - T10492- . Please note the
following when doing so:
The cylinder head cover -1- is installed:
•
The distance -a- is approx. 1 mm.
the cylinder head cover is removed:
•
The groove -1- on the rig pin - T10492- must line up with the
camshaft housing -2-.
– Remove air filter
⇒ "6.5 Removing and installing air filter", page 364
– Separate electrical plug connection -2-.
– Unscrew screw -1-, remove camshaft control valve 1 - N205- .
Note
The adjusting valve -2- and the camshaft adjuster -1- are shown
without the housing in the illustration for the sake of clarity.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
113
2. Valve gear