Skoda Octavia III 2013 Workshop Manual page 38

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
10 - Screw
❑ replace after removal
❑ Tightening torque and tightening order
11 - Screw
❑ replace after removal
❑ Tightening torque and tightening order
12 - Screw
❑ replace after removal
❑ 60 Nm + torque a further 90° (
13 - Screw
❑ replace after removal
❑ 60 Nm + torque a further 90° (
14 - Gearbox mount
❑ with supporting arm
15 - Screw
❑ replace after removal
❑ 50 Nm + torque a further 90° (
16 - Bolt
❑ Tightening torque ⇒ Gearbox; Rep. gr. 34
17 - Gearbox support bracket
❑ for vehicles with manual gearbox
18 - Bolt
❑ Tightening torque ⇒ Gearbox; Rep. gr. 34
Engine support bracket - tightening torque and tightening order
Note
Replace screws which have been tightened firmly to a torquing
angle.
– Tighten screws in steps in the given sequence:
Stage Screws
1. -1 ... 3-
2. -1 ... 3-
3. -1 ... 3-
30
Rep. gr.10 - Removing and installing engine
⇒ page 31
⇒ page 31
1
/ 4 turn)
1
/ 4 turn)
1
/ 4 turn)
Tightening torque/torqueing angle
7 Nm
40 Nm
Turn 180° further