Skoda Octavia III 2013 Workshop Manual page 219

12 - Circlip
❑ for heat shield
13 - Heat shield
❑ check for firm seating
14 - Connected fuel hoses
❑ do not kink
❑ Unlock the quick coupling and disconnect
❑ observe the arrow direction (feed or return line) on the closing flange when installing
❑ clipped in place on fuel tank
15 - Support
❑ For fuel pump control unit - J538-
❑ Removing and installing fuel pump control unit - J538-
⇒ "2.14 Removing and installing fuel pump control unit J538 ", page 263
Earth connection for fuel filler neck
– Connect earth connection as shown in the illustration.
– Ensure the quick coupling fits tightly:
♦ Plug -2- of the earth connection on the threaded ring -3- of the
fuel filler neck.
– Unhook contact peg -1- of the earth connection in the securing
bore on the fuel tank -4- and press in the distance sleeve -5-.
WARNING
Risk from electrostatic charge.
♦ After installing, use an ohmmeter to test the electrical con‐
nection of the threaded ring on the fuel filler neck at a bare
point on the body.
• Specified value approximately 0 Ω.
Fitting location of the fuel delivery unit
• Arrow -3- at the fuel tank must show marking -2- at the lock
ring -1-
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
⇒ "2.12 Separating push-on couplings", page 249
Octavia III 2013 ➤ , Octavia III 2014 ➤
2. Removing and installing parts of the fuel supply system
.
211