Fuel Distributor - Summary Of Components - Skoda Octavia III 2013 Workshop Manual

2.2

Fuel distributor - summary of components

1 - Fuel pressure sender -
G247-
❑ removing and installing
⇒ "4.6 Removing and in‐
stalling fuel pressure
sender G247 ",
page 347
❑ Reuse possible
⇒ "4.6 Removing and in‐
stalling fuel pressure
sender G247 ",
page 347
❑ 100 Nm
2 - High pressure line
❑ between fuel distributor
and injection units
❑ follow all instructions for
installation of high pres‐
sure lines
⇒ "2.9.2 Installing high
pressure line",
page 335
❑ 28 Nm
3 - Fuel distributor
❑ removing and installing
⇒ "2.10 Removing and
installing the fuel distrib‐
utor", page 336
4 - Screw
❑ 20 Nm
5 - O-ring
❑ replace after removal
6 - Control valve for fuel pres‐
sure - N276-
❑ Renew. ⇒ "4.5 Replace fuel pressure regulating valve N276 ", page 346
❑ replace after each removal
❑ Re-adjust after replacing the learning values in "Targeted Functions" ⇒ Vehicle diagnostic tester
❑ 80 Nm
7 - Fuel return-flow hose
8 - Fuel return-flow line
9 - Screw
❑ 8 Nm
10 - High pressure line
❑ between the high pressure pump and the fuel distributor
❑ follow all instructions for installation of high pressure lines
⇒ "2.9.2 Installing high pressure line", page 335
❑ 28 Nm
11 - Screw
❑ 8 Nm
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
2. Injection units/fuel distributor
325