Front, Middle And Rear Silencer, Vehicles With Eu4 Emis - Skoda Octavia III 2013 Workshop Manual

1.1.4 Front, middle and rear silencer, vehicles with EU4 emission level (engine
identification characters CRVC)
1 - Gasket
❑ replace after removal
❑ Check fitting position
⇒ page 378
2 - Clamping sleeve
❑ replace
❑ Fitting position
⇒ page 378
❑ 7 Nm
3 - Pre-exhaust pipe
❑ removing and installing
⇒ "1.2 Removing and in‐
stalling exhaust pipe",
page 380
❑ ustawienie układu wy‐
dechowego bez naprę‐
żeń
⇒ "1.6 Aligning exhaust
system free of stress",
page 386
4 - Screw
❑ 23 Nm
5 - Support
❑ replace if damaged
6 - Front clamping sleeve
❑ before tightening, align
exhaust system free of
stress
⇒ "1.6 Aligning exhaust
system free of stress",
page 386
❑ Fitting position
⇒ page 378
❑ Tighten bolted connections evenly
❑ 30 Nm
7 - Front tunnel bridge
8 - Nut
❑ 20 Nm
9 - Retaining strap
❑ replace if damaged
10 - Hanger
❑ replace if damaged
11 - Rear tunnel bridge
12 - Separation point
❑ for repairs
❑ marked with recesses around the circumference
❑ Separation point
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
⇒ "1.5 Replacing middle or rear silencer", page 385
Octavia III 2013 ➤ , Octavia III 2014 ➤
1. Removing and installing exhaust pipes/silencers
377