Skoda Octavia III 2013 Workshop Manual page 404

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Push engine/gearbox assembly slightly forward (towards the
front of the body) and then pull off the propshaft from the angle
gearbox.
Caution
Risk of damage to the gasket ring -arrow- in the flange of the
propshaft.
Push propshaft horizontally as far back and towards the left
vehicle side as possible.
Note
In case of damaged gasket ring the propshaft must be replaced.
– Tie up propshaft towards the left vehicle side.
Continued for all vehicles
– Release screw -arrow-.
Note
The feet of the assembly aid - T10511- are supported on the
screw heads of the cylinder head cover.
– Place assembly aid - T10511- as shown, suspend retaining
bracket -arrow- in the suspension catch of the exhaust gas
cleaning module.
396
Rep. gr.26 - Exhaust system