Skoda Octavia III 2013 Workshop Manual page 23

– Detach fuel return-flow line -2- and catch the fuel which flows
out with a cleaning cloth
⇒ "2.12 Separating push-on couplings", page 249
Vehicles with radiator versions 1 and 2
– Raise holding clamp -arrow-, remove coolant hose right above
radiator for charge air circuit.
Continued for all vehicles
– Raise holding clamp -arrow-, remove top left coolant hose
from radiator.
Note
For the following clip unclipping procedure use the removal tool
for inner door trim panel - MP8-602/1- .
– Remove plug -2- at the engine control unit - J623-
⇒ "7 Engine control unit", page 366
– Take electrical plug connections -1-, -3-, -4- out of the holder
and disconnect.
– Expose electric cables.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
.
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
1. Removing and installing engine
15