11 - Rubber bearing
❑ for radiator
12 - O-ring
❑ replace after removal
❑ Moisten with coolant
13 - Coolant hose
❑ to remove, raise holding clamps
❑ connect
⇒ page 189
Connect coolant hose with quick coupling
– Remove old O-ring -2- in coolant hose -3-.
– Moisten new O-ring with coolant and insert into coolant hose.
– Press coolant hose onto connection -1- until there is an audible
click.
– Press coolant hose down again and check by pulling that the
plug-in connector is fully engaged.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
4. Radiator and radiator fan
189