Skoda Octavia III 2013 Workshop Manual page 224

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
12 - Electrical plug connection
❑ for sender for fuel gauge display - G-
13 - Electrical plug connection
❑ for Fuel gauge sender 2 - G169-
14 - Lock ring
❑ loosen and/or tighten using wrench - T30101 (3087)-
Note
When loosening and tightening the
lock ring of the holder on the flange
fuel gauge sender 2 - G169- is not
damaged when loosening and tight‐
ening the lock ring.
❑ 110 Nm
15 - Gasket ring
❑ replace if damaged
❑ install when dry
16 - Fuel gauge sender 2 - G169-
❑ check ⇒ Vehicle diagnostic tester
❑ removing and installing
17 - Suction spray pump
❑ check ⇒ "2.15 Check the suction jet pump", page 265
❑ removing and installing
216
Rep. gr.20 - Fuel supply system
⇒ "2.11 Removing and installing the sender for fuel gauge display ", page 245
⇒ "2.16 Removing and installing suction jet pump", page 265