Skoda Octavia III 2013 Workshop Manual page 232

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Connect the fuel extraction device - VAS 5190- with the adapt‐
er for the fuel extraction - VAS 5190 /3- to the fuel feed line.
– Connect ⇒ Vehicle diagnostic tester.
– Perform Targeted Functions
– Repeat the operation if necessary.
Note
The fuel pump is now activated.
– Open shut-off valve at the fuel extraction device - VAS 5190-
until the fuel tank is empty.
2.7.2 Emptying fuel tank if it is more than
full
Special tools and workshop equipment required
♦ Fuel extraction device , e. g. -VAS 5190-
Note
Safety precautions when working on the fuel supply system
♦
⇒ "2 Safety instructions", page 3
Observe rules for cleanliness
♦
⇒ "3.1 Rules of cleanliness", page 6
– In distance -a- from the end of the extraction hose make a
marking -arrow- on the hose.
– Use insulating tape for this purpose.
Rear axle
Vehicles with multi-control arm rear axle
Vehicles with torsion beam rear axle
224
Rep. gr.20 - Fuel supply system
.
empty fuel tank
.
.
/ 4
3
Distance a in mm
945 mm
1010 mm