Skoda Octavia III 2013 Workshop Manual page 194

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
11 - Cooler for charge air circuit
❑ removing and installing
12 - Condenser
❑ removing and installing ⇒ Heating, Air Conditioning; Rep. gr. 87
13 - Rubber bearing
❑ for radiator
14 - O-ring
❑ replace after removal
❑ Moisten with coolant
15 - Coolant hose
❑ to remove, raise holding clamps
❑ connect ⇒ page 186
16 - O-ring
❑ replace after removal
❑ Moisten with coolant
Connect coolant hose with quick coupling
– Remove old O-ring -2- in coolant hose -3-.
– Moisten new O-ring with coolant and insert into coolant hose.
– Press coolant hose onto connection -1- until there is an audible
click.
– Press coolant hose down again and check by pulling that the
plug-in connector is fully engaged.
186
Rep. gr.19 - Cooling
⇒ "4.4 Removing and installing radiator", page 191