Separating Push-On Couplings - Skoda Octavia III 2013 Workshop Manual

– Arrow -3- at the fuel tank must point to marking -2- on the
closing flange -1-.
Caution
Risk of leakage.
♦ The gasket ring must not get damaged or squashed when
inserting the sealing flange.
Note
Ensure that the fuel delivery unit is not damaged when tightening
the lock ring of the holder on the flange.
– Tighten the lock ring with socket wrench - T30101 (3087)- .
– Check the connector for firm seating by pulling in the opposite
direction!
Tightening torques
♦ ⇒ "2.2 Fuel delivery unit - Summary of components",
page 212
2.12

Separating push-on couplings

Special tools and workshop equipment required
♦ Lever - T10468-
Assign quick couplings
Note
Quick couplings of fuel, vacuum and ventilation lines are col‐
♦
our marked. Either the colour point at the quick coupling or the
release button has the corresponding colour.
The push-fit couplings must »audibly« click in place when se‐
♦
curing it.
Check the quick couplings for firm seating by pulling in the
♦
opposite direction!
Push-on coupling
Fuel feed line
Fuel return-flow line
Bleeding
Vacuum
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Colour code on connector
Black
Blue
White, beige
Green
Octavia III 2013 ➤ , Octavia III 2014 ➤
2. Removing and installing parts of the fuel supply system
249