Removing And Installing The Fuel Tank - Skoda Octavia III 2013 Workshop Manual

Variant 7
Quick coupling -1- with release buttons -2- right and left.
– Press push-on coupling -1- in direction of arrow -A- and hold
pressed.
– Press the release buttons -2- in direction of arrow -B- and re‐
move the push-fit coupling -1-.
Pay attention to the colour assignment when installing
⇒ page 249 .
The quick coupling must be heard to click into place.
– Check the quick couplings for firm seating by pulling in the
opposite direction!
2.13

Removing and installing the fuel tank

⇒ "2.13.1 Removing and installing the fuel delivery unit, vehicles
with front-wheel drive ", page 253
⇒ "2.13.2 Removing and installing the fuel delivery unit, vehicles
with four-wheel drive ", page 258
2.13.1 Removing and installing the fuel delivery
unit, vehicles with front-wheel drive
Special tools and workshop equipment required
♦ Disassembly wedge - 3409-
♦ Engine and gearbox jack , e.g. -V.A.G 1383 A-
Removing
Note
Drain the fuel tank
♦
⇒ "2.7 Extract fuel from the fuel tank", page 223
Safety precautions when working on the fuel supply system
♦
⇒ "2 Safety instructions", page 3
Observe rules for cleanliness
♦
⇒ "3.1 Rules of cleanliness", page 6
– Switch off ignition and pull out ignition key.
– Removing rear seat bench ⇒ Body Work; Rep. gr. 72 .
– Unclip cover -1- at retaining tabs -arrows-, using removal
wedge - 3409- .
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
.
.
.
Octavia III 2013 ➤ , Octavia III 2014 ➤
2. Removing and installing parts of the fuel supply system
253