Lubrication; Removing And Installing Parts Of The Lubrication System; Parts Of The Lubrication System - Summary Of Components - Skoda Octavia III 2013 Workshop Manual

17 -

Lubrication

1 Removing and installing parts of the
lubrication system
⇒ "1.1 Parts of the lubrication system - Summary of components",
page 127
⇒ "1.2 Removing and installing oil level and oil temperature trans-
mitter G266 ", page 129
⇒ "1.3 Summary of components - oil filter holder", page 130
⇒ "1.4 Removing and installing the oil filter holder with the engine
oil cooler", page 132
⇒ "1.5 Removing and installing oil sump", page 135
⇒ "1.6 Removing and installing oil pump", page 138
⇒ "1.7 Removing and installing oil pressure switch F1 ",
page 139
⇒ "1.8 Removing and installing oil pressure switch for reduced
oil pressure F378 ", page 140
⇒ "1.9 Removing and installing valve for oil pressure control N428
", page 141
⇒ "1.10 Testing oil pressure", page 142
1.1 Parts of the lubrication system - Sum-
mary of components
Note
If considerable quantities of metal swarf as well as abrasion is
♦
found in the engine oil when carrying out engine repairs, care-
fully clean the oil galleries in order to avoid consequential
damage and additionally replace the oil injection nozzles and
the engine oil cooler as well as the oil filter element.
The oil level must not be above the max. marking - risk of
♦
damage to catalytic converter!
Check the engine oil, amount of oil and oil specification:
♦ ⇒ Maintenance ; Booklet Octavia III .
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤

1. Removing and installing parts of the lubrication system

127