Intake Manifold, Air Filter; Assembly Overview - Intake Manifold - Skoda Octavia III 2013 Workshop Manual

6

Intake manifold, air filter

⇒ "6.1 Assembly overview - intake manifold", page 355
⇒ "6.2 Removing and installing the throttle valve control unit J338
", page 357
⇒ "6.3 Removing and installing intake manifold", page 359
⇒ "6.4 Summary of components - air filter", page 362
⇒ "6.5 Removing and installing air filter", page 364
6.1

Assembly overview - intake manifold

1 - Gasket ring
❑ replace after removal
2 - Fit pin
3 - Screw
❑ 8 Nm
4 - Gasket
❑ replace after removal
5 - Screw
❑ Tightening torque and
tightening order
⇒ page 357
6 - Support
❑ for the intake manifold
❑ Tightening torque and
tightening order
⇒ page 357
7 - Screw
❑ Tightening torque and
tightening order
⇒ page 357
8 - Screw
❑ replace after removal
❑ Tightening torque and
tightening order
⇒ page 357
9 - Fit pin
10 - Screw
❑ 8 Nm
11 - Intake manifold with
charge air cooler
❑ The intake manifold and charge air cooler form a single building unit
❑ removing and installing
12 - Screw
❑ replace after removal
❑ Tightening torque and tightening order
13 - Charge air temperature transmitter after charge air cooler - G811-
❑ removing and installing
⇒ "4.1 Removing and installing intake air temperature transmitter G42 / charge air temperature transmitter
after charge air cooler G811 ", page 342
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
⇒ "6.3 Removing and installing intake manifold", page 359
⇒ page 357
Octavia III 2013 ➤ , Octavia III 2014 ➤
6. Intake manifold, air filter
355