Filling/Bleeding The Fuel System - Skoda Octavia III 2013 Workshop Manual

1 - Fuel filter
❑ Summary of compo‐
nents
⇒ "2.3 Fuel filter - Sum‐
mary of components",
page 217
2 - High pressure pump
❑ Summary of compo‐
nents
⇒ "3.1 Summary of com‐
ponents - high pressure
pump", page 338
3 - Fuel dosage valve - N290-
4 - Fuel temperature transmit‐
ter - G81-
5 - Fuel pressure sender -
G247-
❑ Summary of compo‐
nents
⇒ "2.2 Fuel distributor -
summary of compo‐
nents", page 325
6 - Fuel distributor
❑ Summary of compo‐
nents
⇒ "2.2 Fuel distributor -
summary of compo‐
nents", page 325
7 - Control valve for fuel pres‐
sure - N276-
❑ Summary of compo‐
nents
⇒ "2.2 Fuel distributor -
summary of compo‐
nents", page 325
8 - Injection units
❑ Summary of components
❑ Observe part number ⇒ ETKA - Electronic Catalogue of Original Parts
9 - Fuel tank
❑ with fuel pump for predelivery - G6-
❑ Summary of components
10 - Choke
1.3

Filling/bleeding the fuel system

Caution
In order to prevent the high pressure pump from running dry
(very narrow tolerances) and to achieve a quick engine start
after parts are replaced, the following must be observed:
♦ If fuel system between tank and pump parts/components
have been removed or replaced the fuel system must be
filled/bled before the engine is started up for the first time.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
⇒ "2.1 Summary of components - injection units (injectors)", page 323
⇒ "2.1 Fuel tank with component parts - Summary of components", page 204
1. Diesel direct injection system - fitting location, system overview
Octavia III 2013 ➤ , Octavia III 2014 ➤
321