High Pressure Pump; Summary Of Components - High Pressure Pump - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
3

High pressure pump

⇒ "3.1 Summary of components - high pressure pump",
page 338
⇒ "3.2 Removing and installing the high pressure pump",
page 339
3.1

Summary of components - high pressure pump

1 - Bracket for auxiliary units
❑ removing and installing
⇒ "1.5 Removing and in‐
stalling bracket for aux‐
iliary units", page 41
2 - Bolt
❑ Qty. 3
❑ different lengths
❑ replace after removal
❑ Specified torque:
♦ short screw, 20 Nm + tor‐
1
que a further 45° ( / 8 turn)
♦ long screw, 20 Nm + torque
1
a further 180° ( / 2 turn)
3 - Toothed belt gear on the
high pressure pump
4 - Nut
❑ to release and tighten
use counterholder -
T10051-
❑ 95 Nm
5 - Hub
❑ to remove, use extractor
-T10489-
6 - High pressure pump
❑ with fuel dosage valve -
N290- (do not remove
valve)
❑ removing and installing
⇒ "3.2 Removing and in‐
stalling the high pres‐
sure pump", page 339
Caution
Risk of damage to the
high pressure pump
through running dry.
♦ If the high pressure pump
is removed or replaced,
the fuel system must be
filled/bled before the en‐
gine is started for the first
time
⇒ "1.3 Filling/bleeding the
fuel system", page 321
338
Rep. gr.23 - Mixture preparation - injection
.