Skoda Octavia III 2013 Workshop Manual page 318

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
14 - Seal
❑ replace after removal
15 - Supports
❑ for throttle valve control unit - J338-
16 - Intake air temperature transmitter - G42-
❑ removing and installing
⇒ "4.1 Removing and installing intake air temperature transmitter G42 / charge air temperature transmitter
after charge air cooler G811 ", page 342
❑ 22 Nm
17 - Screw
❑ 10 Nm
18 - Coolant pipe
19 - Screw
❑ 10 Nm
20 - Coolant pipe
21 - O-rings
❑ replace after removal
❑ Moisten with coolant
22 - Throttle valve module - J338-
❑ With throttle valve potentiometer - G69-
❑ removing and installing
23 - O-ring
❑ replace after removal
24 - Air guide pipe
25 - Screw
❑ 8 Nm
26 - Bracket
❑ for throttle valve control unit - J338-
27 - Screw
❑ Tightening torque and tightening order
28 - Screw
❑ Tightening torque and tightening order
Charge pressure sender - G31- - tightening torque
– Tighten -2- to 9 Nm.
310
Rep. gr.21 - Turbocharging/supercharging
⇒ "6.2 Removing and installing the throttle valve control unit J338 ", page 357
⇒ page 357
⇒ page 357