Skoda Octavia III 2013 Workshop Manual page 82

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Insert counterholder - MP1-223 (3067)- into the bore on the
cylinder block Pos. -B-, loosen flywheel screws.
– Release screws and remove flywheel.
Install
Installation is performed in the reverse order, pay attention to the
following points:
Note
Replace screws which have been tightened firmly to a torquing
angle.
– Insert counterholder - MP1-223 (3067)- into the bore on the
cylinder block Pos. -A-.
Tightening torques
♦ ⇒ "2.3 Summary of components - gearbox side summary of
components and flywheel", page 64
74
Rep. gr.13 - Crankshaft group