Skoda Octavia III 2013 Workshop Manual page 247

– Pull sealing flange -3- slightly out of the fuel tank opening.
– Remove gasket ring -1- from fuel tank opening.
– Pull closing flange with fuel line -2- carefully out of the fuel tank
opening.
– Reach into the fuel tank through the opening, remove the drive
jet line -1-, while doing so, press the release at the connection
⇒ "2.12 Separating push-on couplings", page 249
– Remove the pressure line for suction jet pump from the fuel
delivery unit.
– Press the catches -2- and -3- and remove the line.
Caution
There is a risk of fuel flowing out of the fuel delivery unit which
is still full.
♦ Put cleaning cloth underneath to collect fuel.
– Pull fuel delivery unit with sender for fuel gauge display - G-
carefully out of the fuel tank opening, turning and tilting as
appropriate.
Note
When removing the fuel delivery unit, ensure that the float arm of
the fuel gauge sender - G- is not bent.
Vehicles fitted with auxiliary heating
– Pull sealing flange -1- slightly out of the fuel tank opening.
– Remove gasket ring -2- from fuel tank opening.
– Pull closing flange with fuel line and electrical lines carefully
out of the fuel tank opening as far as possible.
Note
When removing the fuel delivery unit, ensure that you do not bend
the float arm of the sender for the fuel gauge display.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
2. Removing and installing parts of the fuel supply system
239