– Unscrew screws -arrows- and carefully remove the radiator for
exhaust gas recirculation -A- through the vehicle tunnel.
Install
Install in the reverse order of removal. When doing this, note the
following:
Note
Replace self-locking nuts and screws as well as gasket rings,
♦
gaskets and O-rings after disassembly.
Secure all hose connection ends with spring-type clips that
♦
comply with the series design ⇒ ETKA - Electronic Catalogue
of Original Parts .
Fit all cable straps on again in the same place when installing.
♦
– Install high catalytic converter
⇒ "2.3 Removing and installing catalytic converter",
page 400
.
– Top up coolant
⇒ page 153
Tightening torques
♦
⇒ "4.1 Exhaust gas recirculation with radiator for exhaust gas
recirculation - Summary of components", page 408
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
.
Octavia III 2013 ➤ , Octavia III 2014 ➤
4. Exhaust gas recirculation system
419