Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
6.5
Removing and installing air filter
Removing
– Unscrew screws -1-, -3-.
– Unlock catch -arrows-, remove cover-2-.
– Expose coolant hose -2-.
– Unlock catches -arrows-, remove air guide pipe upper part
-1-.
– Disconnect the plug connection -2- at the air mass meter -
G70- .
– Disconnect vacuum hose -4-.
– Loosen hose clamp -3-, remove extraction hose.
– Remove air filter -1-.
Install
Installation is performed in the reverse order, pay attention to the
following points:
♦ Tightening torque
⇒ "6.4 Summary of components - air filter", page 362
Note
Connections, charge air pipes and hoses of charge air system
♦
must be free of oil and grease before being installed.
Use a silicone lubricant to assemble the suction hose.
♦
Only install approved spring strap clips for securing the hose
♦
connections ⇒ ETKA - Electronic Catalogue of Original Parts .
364
Rep. gr.23 - Mixture preparation - injection