Skoda Octavia III 2013 Workshop Manual page 29

– Disconnect the plug connection -1- at the exhaust flap control
unit - J883- .
– Slacken the clamping sleeve -2- and slide it backwards.
– Loosen screw -2- and remove clamping sleeve.
– Remove pre-exhaust pipe.
For vehicles with engine identification characters CRKB, CRMB,
CUNA
– Undo the left underfloor trim panel in the middle in the direction
of the exhaust pipe and press down ⇒ Body Work; Rep. gr.
50 .
– Take the electrical plug connection -arrow- for Lambda probe
after catalytic converter - G130- out of its holder and discon‐
nect, expose the electric cable.
Continued for all vehicles
– Separate electrical plug connection -4-.
– Release nut -2- and screws -3-.
– Press coolant pipe -1- and pump for charge air cooler - V188-
Pos. -5- to the side.
Note
Different designs according to build version.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
1. Removing and installing engine
21