Skoda Octavia III 2013 Workshop Manual page 190

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Press release buttons on the hose -1- for crankcase ventila‐
tion, remove hose from cylinder head cover.
– Disconnect vacuum hoses on the air guide pipe -arrows-.
– Release screw -2-, swivel air guide pipe with inlet connection
towards the rear and detach from exhaust gas turbocharger.
– Loosen hose clamp -1-, remove coolant hose.
– Unscrew screw -2-, remove screw -3- and swivel coolant line
to the side.
– Expose the following plug connections and electric cables:
2 - for exhaust gas temperature transmitter 4 - G648-
3 - for exhaust gas temperature transmitter 3 - G495-
4 - for lambda probe - G39-
Vehicles fitted with auxiliary heating
– Release screws -arrows-, push the coolant pipe slightly to the
side.
Vehicles with four-wheel drive
– Remove the right driveshaft from the angle gearbox ⇒ Sus‐
pension; Rep. gr. 40 .
Continued for all vehicles
Volkswagen Technical Site: http://vwts.ru http://vwts.info
огромный архив документации по автомобилям Volkswagen, Skoda, Seat, Audi
182
Rep. gr.19 - Cooling