Skoda Octavia III 2013 Workshop Manual page 61

– Loosen fixing screw -1- in the camshaft sprocket by half a turn
but do not release it.
– Lock the crankshaft toothed belt pulley using the crankshaft
arrester - T10490- .
• The studs of the crankshaft arrester - T10490- must reach into
the threaded bores of the toothed belt pulley.
• The rig pin of the crankshaft arrester - T10490- must reach into
the bores at the sealing flange.
Caution
Risk of engine damage.
♦ The diesel injection pump rig pin - 3359- must not be used
as a counterholder for loosening the camshaft toothed belt
pulley.
– Remove rig pin and partially undo the screws for the camshaft
sprocket. Before removing fully, peg back the rig pin.
– Loosen screw -arrow- for camshaft toothed belt pulley; to do
so, use counterholder - T10172- with adapters -T10172/11- .
– Lock hub of the high pressure pump using the rig pin -
T10492- ; to do so, insert the rig pin into fork -2- of the hub and
into the bore behind it -1- in the auxiliary units bracket.
– Unscrew the rig pin and partially unscrew the nuts for the high
pressure pump toothed belt. Before removing fully, peg back
the rig pin.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
1. Removing and installing a V-ribbed belt and a toothed belt
53