Skoda Octavia III 2013 Workshop Manual page 77

• Locating hole -A- on sender wheel -C- must align with marking
-B- on sealing flange.
– Place sealing flange with front side facing down on a clean
level surface.
– Press the sealing lip supporting ring -A- down -arrows- until it
rests on the level surface.
• Upper edge of sender wheel and front edge of sealing flange
must align -arrows-.
– Place sealing flange with front side facing downwards onto
assembly tool - T10134- so that locating pin -B- can be inser‐
ted in sender wheel bore -A-.
• The sealing flange must lie flat on the assembly device.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
2. Removing and installing sealing flange and flywheel
69