Removing And Installing Fuel Pump Control Unit J538 - Skoda Octavia III 2013 Workshop Manual

• The plug -2- on the metal plate ring -3- must be pushed on
firmly.
• The contact peg -1- must be hung on the fuel tank -4- and
secured with the spacer bush -5-.
WARNING
Risk from electrostatic charge.
♦ After installing, use an ohmmeter to test the electrical con‐
nection of the plate ring on the fuel filler neck at a bare
point on the body.
• Specified value approximately 0 Ω.
♦ Tightening torques, assembly instructions
⇒ "2.1 Fuel tank with component parts - Summary of compo‐
nents", page 204 .
2.14 Removing and installing fuel pump con‐
trol unit - J538-
Special tools and workshop equipment required
♦ Disassembly wedge - 3409-
Removing
– Move front seats all the way forward.
– Switch off ignition.
– Removing rear seat bench ⇒ Body Work; Rep. gr. 72 .
– Unclip cover -1- for closing flange using the disassembly
wedge - 3409- from the uptake -arrows-.
– Unclip sealing grommet -1- downwards from the cover -2-.
– Guide the cover -2- backward at the electric wiring loom -3-.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
2. Removing and installing parts of the fuel supply system
263