•
Tensioning pulley locked with rig tool - T10265- and fixed with
nut -1- up to right stop.
•
Sheet peg -arrow- of the tensioning pulley must engage in the
cast iron recess of the cylinder head.
•
Lock the hub of the camshaft with the rig pin for diesel injection
pump - 3359- .
•
Screw loosely inserted.
•
It must still be possible to just turn the camshaft toothed belt
pulley, however it must not tilt.
•
Fixing screw -1- of the driver loosened by one half turn, posi‐
tioned in the centre position in the elongated hole -2-.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
1. Removing and installing a V-ribbed belt and a toothed belt
55