Skoda Octavia III 2013 Workshop Manual page 268

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Unclip sealing grommet -1- downwards from the cover -2-.
– Guide the cover -2- backward at the electric wiring loom -3-.
– Unlock electrical plug connections -2- from left closing flange,
and remove.
– Unlock electrical plug connections -1- and -3- from closing
flange, and disconnect.
– Unclip electrical plug connections -1- and -3- from the uptakes
on the closing flange.
– Open tank flap unit -2-.
– Clean the area around the fuel filler neck.
– Unscrew the cap -1- for the fuel filler neck.
Note
Close the opening of the fuel filler neck with a clean cloth so that
no dirt can penetrate.
– Remove tank flap unit ⇒ Body Work; Rep. gr. 55 .
– Remove right rear wheel ⇒ Chassis; Rep. gr. 44 .
– Remove the rear right wheelhouse liner ⇒ Body Work; Rep.
gr. 66 .
– Unscrew screws -1- -2- for fuel filler neck.
– Remove the rear silencer
⇒ "1.4 Removing and installing rear silencer", page 381
260
Rep. gr.20 - Fuel supply system
.