Skoda Octavia III 2013 Workshop Manual page 402

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Disconnect electrical plug connections and lay the electric ca‐
bles to one side:
1 - for exhaust gas temperature transmitter 4 - G648-
2 - for exhaust gas temperature transmitter 3 - G495-
3 - for exhaust gas temperature transmitter 2 - G448-
– Remove exhaust temperature transmitter - G648- and -G495-
-G448- ⇒ "3 Exhaust temperature regulation", page 402
– Remove lambda probe - G39-
⇒ "3.1 Summary of components - exhaust temperature regu‐
lation", page 402 .
– Remove lambda probe - G130-
⇒ "5.3 Removing and installing Lambda probe after catalytic
converter G130 ", page 353
– Open heat protection sleeve -1-.
– Take electrical plug connection-5 - out of the holder, discon‐
nect and expose electric cable.
– Disconnect electrical plug connections -3- and -4- and expose
electric wiring loom.
– Release screw -2-.
– Detach vacuum hose -arrow- and put to one side.
394
Rep. gr.26 - Exhaust system
.
.