Skoda Octavia III 2013 Workshop Manual page 102

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Remove front top coolant pipe
⇒ "3.2 Removing and installing the front top coolant pipes",
page 172 .
– Remove rear coolant pipe
⇒ "3.7 Removing and installing the rear coolant pipe",
page 179 .
– Remove left coolant pipe
⇒ "3.6 Remove and install the left coolant pipes", page 178
– Remove the front silencer
⇒ "1.2 Removing and installing exhaust pipe", page 380
– Remove the toothed belt from the camshaft
⇒ "1.10 Remove the toothed belt from the camshaft",
page 49 .
For vehicles with engine identification characters CLHA, CLHB,
CKFB, CKFC, CRVC, CUPA
– Open heat protection sleeve -1-.
– Take electrical plug connection-4 - out of the holder, discon‐
nect and expose electric cable.
– Disconnect electrical plug connections -3-, -5-, expose electric
wiring loom:
– Unscrew screw -2-, lay bracket with differential pressure trans‐
mitter - G505- to the rear.
For vehicles with engine identification characters CRKB, CRMB,
CUNA
– Open heat protection sleeve -1-.
– Disconnect electrical plug connections -3-, -5-, -6- expose
electric wiring loom.
– Release screw -2-.
– Separate electrical plug connection -4-.
– Detach vacuum hose -arrow- and put to one side.
– Place the bracket with the differential pressure transmitter to
the rear.
Continued for all vehicles
94
Rep. gr.15 - Cylinder head, valve gear
.
.