– Equipment variant with water level sender - G63- : Disconnect
the electrical plug connection at the water level sender -1-.
– Remove fuel filter.
– Collect any leaking fuel.
Install
Installation is performed in the reverse order, pay attention to the
following points:
Note
Observe the instructions for the fuel hose in the engine com‐
♦
partment
⇒ "2.6 Fuel hoses in the engine compartment", page 222
Secure all hose connections with specified clamps ⇒ ETKA -
♦
Electronic Catalogue of Original Parts .
– Filling and bleeding the fuel system
⇒ "1.3 Filling/bleeding the fuel system", page 321
Tightening torques
♦
⇒ "2.3 Fuel filter - Summary of components", page 217
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
.
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
2. Removing and installing parts of the fuel supply system
221