Skoda Octavia III 2013 Workshop Manual page 272

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Push up fixing catch -2- with a finger between the bottom plate
and the fuel tank arrow -A-.
– Simultaneously pull the fuel pump control unit - J538- Pos.
-1- at the electric wiring loom -3- carefully out of the uptake
arrow -B-.
– Take out fuel pump control unit - J538- inwards between fuel
tank and bottom plate.
– Remove electrical plug connection and fuel pump control unit
- J538- .
Install
Installation is carried out in the reverse order. Pay attention to the
following:
– Connect the electrical wiring harness to the fuel pump control
unit - J538- .
– Check the connector for firm seating by pulling in the opposite
direction!
– Push fuel pump control unit - J538- into the uptake and push
in until there is an audible click.
– Check the fuel pump control unit - J538- for firm seating by
pulling in the opposite direction.
264
Rep. gr.20 - Fuel supply system