Check Sender For Fuel Gauge Display G - Skoda Octavia III 2013 Workshop Manual

– Make sure that the shut-off tap -C- is closed at the pressure
gauge - VAS 6551- -1-.
– The shut-off taps -A- and -B- must be open at the pressure
gauge - VAS 6551- -1-.
– Repeat function
check fuel pump conveying pressure/
⇒ page 281
quantity
If the minimum fuel flow rate is now reached
– Check fuel lines for possible restrictions (kinks) or blockages
and damage.
– Test fuel lines for tightness.
If the specific value is still not reached
– Remove fuel delivery unit
⇒ "2.8 Removing and installing fuel delivery unit", page 232
– Check filter strainer for soiling.
– Check that all hose connections are connected -arrows-.
Only if no fault has yet been detected
– Replace fuel delivery unit
⇒ "2.8 Removing and installing fuel delivery unit", page 232
2.18 Check sender for fuel gauge display - G-
Special tools and workshop equipment required
♦ Multimeter , e.g. -V.A.G 1526E-
♦ Measuring tool set , e.g. -V.A.G 1594 C-
♦ Disassembly wedge - 3409-
Work procedure
– Move front seats all the way forward.
– Switch off ignition.
– Removing rear seat bench ⇒ Body Work; Rep. gr. 72 .
– Unclip cover -1- using the disassembly wedge - 3409- from the
uptake -arrows-.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
.
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
.
2. Removing and installing parts of the fuel supply system
285