Skoda Octavia III 2013 Workshop Manual page 17

♦ Hose clip pliers are recommended to install spring-type clips.
♦ Install hose connections with screw clamps
⇒ "1.6 Hose connections with screw clamps", page 308
♦ Before screwing down the oil feed line, fill the exhaust turbo‐
charger via the connection fitting with engine oil.
♦ After installing the turbocharger, run engine at idling speed for
about 1 minute to ensure that oil is supplied to the turbocharg‐
er.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
9
3. Repair instructions