Skoda Octavia III 2013 Workshop Manual page 311

Removing
– Remove engine cover
⇒ "1.1 Removing and installing engine trim panel", page 10
Version 1
– Disconnect the electrical plug connection -3- from the position
sender for charge pressure regulator - G581- .
– Remove the vacuum hose -2- from the vacuum unit for charge
pressure control.
– Remove detention ring -4-.
– Release screws -1- from the pressure box.
– Unhook the control rod from the adjuster lever and remove the
pressure box with position sender for charge pressure regu‐
lator - G581- .
Version 2
– Disconnect the electrical plug connection -2- from the position
sender for charge pressure regulator - G581- .
– Remove the vacuum hose -1- from the vacuum unit for charge
pressure control.
– Remove detention ring -4-.
– Unscrew screws -3- from the pressure box.
– Unhook the control rod from the adjuster lever and remove the
pressure box with position sender for charge pressure regu‐
lator - G581- .
Install
Note
Use new screws and a new circlip from the repair kit!
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
1. Charge-air system - exhaust gas turbocharger
303