Skoda Octavia III 2013 Workshop Manual page 264

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– As shown in the illustration, place the engine and gearbox jack
- V.A.G 1383 A- under the vehicle for support purposes and
support the fuel tank.
– Unscrew screws -1- and -3-.
Note
To provide a clearer illustration, the fuel tank is shown without
♦
the engine and gearbox jack - V.A.G 1383 A- .
The aid of a 2nd mechanic is required to remove the fuel tank.
♦
– Lower fuel tank with engine and gearbox jack - V.A.G 1383
A- .
– Lower fuel tank by pivoting it in the side downwards.
– Pull the filler tube through between the rear axle and body‐
shell.
Vehicles with torsion beam axle
– Mark movement direction on the tensioning strap.
– Release screw -5-.
– Remove suspension/exhaust system -arrow-.
– Unscrew screws -3- and remove tensioning strap -7-.
– As shown in the illustration, place the engine and gearbox jack
- V.A.G 1383 A- under the vehicle for support purposes and
support the fuel tank -1-.
256
Rep. gr.20 - Fuel supply system