Skoda Octavia III 2013 Workshop Manual page 28

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Disconnect electric plug connection -1- on the control valve for
the air conditioning system - N280- compressor.
Caution
Risk of damaging AC compressor, refrigerant lines and hoses.
♦ Do not over-tension, buckle or bend refrigerant lines and
hoses.
– Unscrew screws -arrows-.
WARNING
Risk of injury through refrigerant.
♦ Do not open the refrigerant circuit of the air conditioning
system.
– Remove AC compressor with connected refrigerant hoses
from the holder and strap up to the right side.
– Remove plug -1- for radiator fan, for this purpose slide screw
clamp backwards arrow -A- and press release button down.
– Press locking lugs for fan shroud left and right simultaneously
arrow -B- and remove fan shroud downwards from the radia‐
tor.
– Unscrew left and right cardan shaft -arrow- from the gearbox
⇒ Chassis; Rep. gr. 40 and strap up towards the rear.
Note
Make sure that the surface protection of the cardan shaft is not
damaged.
20
Rep. gr.10 - Removing and installing engine