Step 2, The Engine Was Not Started With Incorrect Fuel - Skoda Octavia III 2013 Workshop Manual

– Disconnect fuel return-flow line -2- at the closing flange
⇒ "2.12 Separating push-on couplings", page 249
– Connect connecting line - VAS 6551/1- of the pressure gauge
to the fuel return-flow line.
– If necessary, extend the connecting line - VAS 6551/1- using
the connecting nipple - VAS 6551/5-1- and a commercially
available hose.
– Guide the free end of the line connecting line - VAS 6551/1-
into a suitable container.
– Connect a vehicle diagnosis tester .
– Perform Targeted Functions
Note
The fuel pump is now activated.
– If necessary, repeat this procedure until the fuel tank is com‐
pletely empty.
Remove fuel delivery unit
⇒ "2.8 Removing and installing fuel delivery unit", page 232
– Check the fuel tank for swarfs.
– Empty fuel pump reservoir of the fuel delivery unit.
– Carry out a visual inspection for coarse contamination and
swarfs in the fuel pump reservoir and on the preliminary stage
screen.
Are swarfs present?
Yes
⇒ "1.3 Step 3, metal swarfs are present in the fuel delivery unit
and the fuel tank", page 200
No
⇒ "1.4 Step 4, no metal swarfs are present in the fuel delivery
unit and the fuel tank", page 201
1.2 Step 2, the engine was not started with
incorrect fuel
– Empty fuel tank as far as possible through the filler neck using
the fuel extraction device - VAS 5190-
⇒ "2.7.2 Emptying fuel tank if it is more than 3/4 full",
page 224 .
– Removing rear seat bench ⇒ Body Work; Rep. gr. 72 .
– Unclip cover -1- for closing flange with the disassembly wedge
- 3409- on the retaining tabs -arrows-.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
.
empty fuel tank
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
.
1. Measures in case of misfuelling
199