Skoda Octavia III 2013 Workshop Manual page 95

– Unscrew exhaust temperature transmitter 3 - G495- Pos. -2-
with a tool from the tool set SW 17 - T10395- and a suitable
tool insert.
– Unscrew screw -3-, expose the pipeline and push it to the side.
– Unlock catches -arrows-, unhook and push top toothed belt
guard -1- to the right side
– Remove the injection units
⇒ "2.8 Removing and installing the injection units",
page 331 .
– Press release buttons on the hose -1- for crankcase ventila‐
tion, remove hose from cylinder head cover.
– Disconnect vacuum hoses on the air guide pipe -arrows-.
– Slacken hose clamp -3-, remove air guide pipe from air mass
meter - G70- .
– Release screw -2-, swivel air guide pipe with inlet connection
towards the rear and detach from exhaust gas turbocharger.
For vehicles with engine identification characters CLHA, CLHB,
CKFB, CKFC, CRVC, CUPA
– Open heat protection sleeve -1-.
– Disconnect electrical plug connections -3-, -4-, -5-, expose
electric wiring loom.
– Unscrew screw -2-, lay bracket with differential pressure trans‐
mitter - G505- to the rear.
For vehicles with engine identification characters CRKB, CRMB,
CUNA
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
1. Removing and installing cylinder head
87