Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Remove engine cover
⇒ "1.1 Removing and installing engine trim panel", page 10
– Remove noise insulation.
– Pull off return-flow line connections on injection unit by pulling
release buttons upwards -arrows-.
– Disconnect electrical plug connections -arrows- at the glow
plugs.
Note
Each clamping claw secures 2 injection valves and can only be
removed when both injection units are »removed«.
– Unscrew union nuts of the respective high pressure lines
-1...4- and pull off the corresponding high pressure lines.
– Close open lines and connections with blind plugs.
332
Rep. gr.23 - Mixture preparation - injection
.