Skoda Octavia III 2013 Workshop Manual page 26

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Separate plug connection -3-.
– Press back B+-pole protection -2- and unscrew B+-cable from
the starter magnet switch.
– Release nuts -4-, remove earth cable.
Caution
Risk of destruction of the (mechatronics) control unit by static
discharge.
♦ Do not allow the gearbox plug contacts to come into con‐
tact with your hands.
– To discharge any static electric charge built up on your body,
touch the earth with your hand (without gloves).
– Disconnect electric plug connection -1- for dual clutch gearbox
mechatronics - J743- , turn the turn lock anticlockwise.
– Remove selector lever linkage from gearbox, unscrew linkage
support and strap up with selector lever linkage ⇒ Gearbox;
Rep. gr. 34 .
– Screw out screws -arrows- for gearbox mount by approxi‐
mately 2 turns.
Vehicles with dual clutch gearbox 0D9
– Remove selector lever linkage from gearbox and pull it out of
the linkage support ⇒ Gearbox; Rep. gr. 34 .
– Separate plug connection -2-.
– Press back B+-pole protection -1- and unscrew B+-cable from
the starter magnet switch.
– Unscrew the earth cable on the body.
Caution
Risk of destruction of the (mechatronics) control unit by static
discharge.
♦ Do not allow the gearbox plug contacts to come into con‐
tact with your hands.
– To discharge any static electric charge built up on your body,
touch the earth with your hand (without gloves).
– Disconnect electric plug connection -4- for dual clutch gearbox
mechatronics - J743- , turn the turn lock anticlockwise.
Volkswagen Technical Site: http://vwts.ru http://vwts.info
огромный архив документации по автомобилям Volkswagen, Skoda, Seat, Audi
18
Rep. gr.10 - Removing and installing engine