Removing And Installing Misfuelling Protection - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Connect connectors -1- and -2-.
– If present, unhook the electrical plug connection -3- for dosing
pump of the auxiliary heating - V54- on the closing flange.
– Check the connector for firm seating by pulling in the opposite
direction!
– After installing the fuel delivery unit, refuel the vehicle with at
least 5 litres of fuel.
Tightening torques
♦ ⇒ "2.2 Fuel delivery unit - Summary of components",
page 212
2.9 Removing and installing misfuelling pro‐
tection
Special tools and workshop equipment required
♦ Circlip pliers
Removing
Note
Safety precautions when working on the fuel supply system
♦
⇒ "2 Safety instructions", page 3
Observe rules for cleanliness
♦
⇒ "3.1 Rules of cleanliness", page 6
– Clean the area around the fuel filler neck.
– Unscrew the cap from the fuel filler neck.
– Unlock catch for lock ring with Torx screwdriver -arrow-.
242
Rep. gr.20 - Fuel supply system
.
.