Skoda Octavia III 2013 Workshop Manual page 274

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Note
If necessary drain the fuel tank
♦
⇒ "2.7 Extract fuel from the fuel tank", page 223
Safety precautions when working on the fuel supply system
♦
⇒ "2 Safety instructions", page 3
Observe the regulations concerning cleanliness when working
♦
on the fuel supply/injection system
⇒ "3.1 Rules of cleanliness", page 6
Make sure that the sender for fuel gauge display is not bent.
♦
Removing
– Switch off ignition and pull out ignition key.
– Removing rear seat bench ⇒ Body Work; Rep. gr. 72 .
– Unclip cover -1- for the right closing flange with the disassem‐
bly wedge - 3409- on the retaining tabs -arrows-.
– Unclip sealing grommet -1- downwards from the cover -2-.
– Guide the cover -2- backward at the electric wiring loom -3-.
– Disconnect the electrical plug connections -1- and -2- from
closing flange.
Vehicles fitted with auxiliary heating
– Unhook the electrical plug connection -3- for dosing pump -
V54- on the closing flange.
– Unlock plug connection -3- for the dosing pump - V54- and
remove it.
Continued for all vehicles
266
Rep. gr.20 - Fuel supply system
.
.
.